PTD-100 Temperature Sensor Connection KitInstallation InstructionsTerminator ZP-PTD100-XPfor use with PTD-100 temperature sensor(s)For Connection of P
Kit Contents 1 Due to the risk of electrical shock, arcing and re caused by product damage or improper usage, installation or maintenance
2.1.3.Insert banding guide into expediter and snap into place.Mount expediter to pipe using pipe band.Tighten cap securely.B-type banding - order sepa
Installation Instructions 3 Install junction box lid and twist hand tight. Insert screw-driver into ratchet slots located on side of junction box ba
Use screwdriver to ratchet on junction box lid. Lid will rotate 30 degrees.Lid latch mechanism fully engaged. To remove lid, repeat steps 12 and 13
Translation 5 FrançaisInstructions d’installation du kit de connexion à la sonde de température.Terminator ZP-PTD100-XP pour utilisation avec les s
6 РусскийИнструкция по монтажу набора подключения температурного датчика PTD-100.Соединительная коробка Terminator ZP-PTD100-XP для применения с т
Form I-431121P-0610 Specications and information are subject to change without notice.THERMON...The Heat Tracing SpecialistsEuropean Headquarte
Comments to this Manuals