TubeTrace® Tubing Bundlesfor Custom CEMS and Analytical UmbilicalsINSTALLATION PROCEDURESMetric Units
1Receiving, Storing and Handling . . .1. Inspect materials for damage incurred during shipping. Report damages to carrier for settlement.2. Identify
Standard Cable Tray(Typical)Plastic Cable Tie(Typical)Perforated AngleIron SupportPlastic Cable Tieor Stainless Steel BandingStrut Channel (Typical)S
3Bending Procedure . . .Thermon tubing bundles should be installed so there is no strain on any fi ttings after the installation is complete. The cross
Pulling Procedures . . .1. The pulling line should be connected to the tube bundle using an appropriate sized Kellems grip for your application. Do no
Table 2: Strut Clamp SelectionNominal Bundle O.D. Strut Clamp Size 25mm 32mm 32mm 38mm 41mm 51mm67mm 64mm86mm 76mm92mm 89mmTubing Bundle Attachment Me
TubeTrace® Tubing Bundle Field Test Procedure1. Verify that bundle is properly secured to the support structure without causing deformation to insula
Customer: Contractor: Address: Address: Phone No: Phone No. Project Reference:Record 1: Prior to Installation Bundle Model #: Reel Length (in
Comments to this Manuals